spacer spacer spacer spacer
Kaydon Bearings spacer spacer

800.514.3066

customer service
spacer
spacer

Kaydon Reali-Slim® sealed bearings

JU series (double sealed)
Type C – radial contact

A Conrad assembled bearing designed primarily for application of radial load—deep ball grooves also permit application of some thrust load in either direction—often used in conjunction with another bearing.

Click on the Kaydon part number to view and download 3D models and CAD files. You must login or register before accessing drawings.
 

 spacer

 
Log in to access Slewing Bearing 3D models & CAD files. Access Thin Section Bearings at SKF.com
 
Forgot password?  |  Register
Kaydon
part
number		 Dimensions in inches Capacities (lbs)1 Limiting
speeds
(RPM)*		 Torque
max.
no load
(in-lb)4		 Approx.
weight
(lbs)
Bore Outside
dia.		 Land
dia.
L1		 Land
dia.
L2		 Dynamic Static2
Kaydon
radial		 ISO
radial3		 Radial
JU040CP0 4.000 4.750 4.150 4.543 1,073 2,321 2,100 1,640 2.9 0.55
JU042CP0 4.250 5.000 4.400 4.793 1,108 2,370 2,220 1,520 3.2 0.58
JU045CP0 4.500 5.250 4.650 5.043 1,143 2,418 2,340 1,440 3.5 0.61
JU047CP0 4.750 5.500 4.900 5.293 1,176 2,464 2,460 1,360 3.9 0.65
JU050CP0 5.000 5.750 5.150 5.543 1,209 2,509 2,590 1,300 4.3 0.68
JU055CP0 5.500 6.250 5.650 6.043 1,274 2,594 2,830 1,180 5.1 0.74
JU060CP0 6.000 6.750 6.150 6.543 1,337 2,674 3,070 1,080 6.1 0.81
JU065CP0 6.500 7.250 6.650 7.043 1,397 2,751 3,315 1,000 7.0 0.87
JU070CP0 7.000 7.750 7.150 7.543 1,457 2,823 3,550 920 8.1 0.93
JU075CP0 7.500 8.250 7.650 8.043 1,514 2,893 3,790 860 9.2 0.99
JU080CP0 8.000 8.750 8.150 8.543 1,570 2,960 4,030 810 10.4 1.06
JU085CP0 8.500 9.250 8.650 9.043 1,624 3,024 4,270 770 11.7 1.12
JU090CP0 9.000 9.750 9.150 9.543 1,678 3,085 4,510 720 13.0 1.18
JU100CP0 10.000 10.750 10.150 10.543 1,781 3,203 4,990 650 16.0 1.31
JU110CP0 11.000 11.750 11.150 11.543 1,879 3,313 5,470 590 19.2 1.43
JU120CP0 12.000 12.750 12.150 12.543 1,974 3,417 5,950 540 22.8 1.56
spacer spacer
Notes
1 Capacities listed are not simultaneous. For combined loading see discussion of Bearing Selection and Load Analysis in the Kaydon Reali-Slim® bearing catalog. Dynamic capacities are based upon 1 million revolutions of L10 life. Published capacities do not apply to hybrid series bearings P, X, and Y. Contact Kaydon product engineering for values.
2 Static capacities are non-brinell limits based on rigid support from the shaft and housing.
3 ISO Radial ratings are calculated per ISO 281:1990. They are included for comparison only.
4 Torque figures shown are for single bearings with standard lubricant at room temperature and under 5 pounds thrust load.
5 "F" is the maximum shaft or housing fillet radius the bearing corners will clear.
* Values apply to bearings loaded up to 20% of their dynamic capacity.
 
Sealed series bearings are supplied with general purpose grease, satisfactory for operating temperatures of -40°F to +250°F (-40°C to +121°C). Other lubricants are available on special order.

 
Related pages
JU series (double sealed), type X
Thin section bearing selector
Reali-Slim® open & sealed bearings part number codes
Reali-Design® engineering software

Related downloads
Kaydon Reali-Slim® bearing catalog (Adobe PDF)

Adobe Acrobat Reader

 spacer spacer

Snap-over separator
3/16" balls

JU series (double sealed), type C - radial contact, bearing profile

5F = 0.015
Bearing corners are
normally chamfered