Ultra-Slim® extra thin section bearings, 2.5 mm, type X

Contact Kaydon customer service 800.514.3066

A Conrad assembled bearing designed for applications involving multiple loads. Unique internal geometry permits application of radial load, thrust load in either direction, and moment load, individually or in any combination. A single four-point contact bearing may replace two bearings in many applications.

Kaydon part number	Dimensions in mm				Capacity		Loading limits		Approx. mass (g)
	Bore	Outside dia.	Land dia. L₁	Land dia. L₂	Radial newtons		Thrust newtons³	Moment nm³
	Bore	Outside dia.	Land dia. L₁	Land dia. L₂	Static¹	Dyn.²	Thrust newtons³	Moment nm³
* † S03503XS0	35	41	37.2	38.8	711	585	1045	7.9	5
* † S06003XS0	60	66	62.2	63.8	1208	847	934	11.8	9
* † S07003XS0	70	76	72.2	73.8	1407	934	890	13.0	11
* † S07403XS0	74	80	76.2	77.8	1487	965	867	13.4	11
* † S08003XS0	80	86	82.2	83.8	1606	1015	845	14.0	12
* † S09003XS0	90	96	92.2	93.8	1805	1096	801	14.9	13
* † S10003XS0	100	106	102.2	103.8	2003	1177	756	15.6	15
* † S11003XS0	110	116	112.2	113.8	2201	1252	734	16.6	16
* † S12003XS0	120	126	122.2	123.8	2400	1320	689	17.0	18
* † S13003XS0	130	136	132.2	133.8	2618	1401	645	17.2	19
* † S14003XS0	140	146	142.2	143.8	2818	1470	623	17.8	21
* † S15003XS0	150	156	152.2	153.8	3016	1538	601	18.4	22
* † S16003XS0	160	166	162.2	163.8	3215	1600	578	18.9	24
* † S17003XS0	170	176	172.2	173.8	3413	1669	556	19.2	25

Notes
1	Static radial capacities are based on maximum allowable contact stresses. Adequate support of the races is assumed to help assure uniform ball support.
2	Dynamic radial capacities are included for life calculation purposes. These are based on the assumption that the shaft and housing have adequate strength to support the loads without causing excessive distortion of the bearing rings.
3	Higher loading limits may be achieved with sufficiently rigid supports that will better restrict the movement of the bearing races under load.
4	"F" is the maximum shaft or housing fillet radius the bearing corners will clear.
*	Contact Kaydon for lead time and minimum purchase requirement.
†	Contact Kaydon for SolidWorks model.

Related downloads
Catalog 300: Ultra-Slim® bearings (Adobe PDF)
Catalog 300: all pages (Adobe PDF)
Precision tolerances and recommended fits (Adobe PDF)

Adobe Acrobat Reader

Full complement or
ball spacer ball 1/16"

3 mm series, type X - 4-point contact, bearing profile
⁴F = 0.25
Bearing corners are
normally chamfered

About
History
News
Trade shows
Divisions
Locations
Certifications
Jobs

Home
Site map
Search
Login
Register

Thin section
bearings
Overview
Reali-Slim® bearings:
      Open bearings
      Sealed bearings
      MM™ metric bearings
      TT® turntables
Ultra-Slim® bearings
Custom bearings

Slewing ring
bearings
Overview
RK slewing ring bearings
MT slewing ring bearings
KH slewing ring bearings
HS slewing ring bearings

Bearing
repair
Overview
Our process
Case studies
White papers
FAQs
Request for
quote

Markets
Aerospace
& defense
Heavy
equipment
Industrial
machinery
Medical
systems
Renewable
energy
Semiconductor

Resources
Engineering
R & D
Engineering software
Downloads
White papers
FAQs

Distributors
US/Canada
International

Contact
Contact us & literature request
Customer service
Request for quote:
      Standard products
      Bearing remanufacturing
Specification data sheets:
      Custom bearings
      Slewing ring bearings
Return material request
Terms of use
Privacy policy
Supplier info

©2010–2012 Kaydon® Corporation Inc., Bearings Division. All rights reserved.
Kaydon®, the Kaydon® logo, and all other trademarks, unless otherwise noted, are owned or licensed by the Kaydon® Corporation and its subsidiaries.
Muskegon, Michigan USA  |   231.755.3741  |   800.514.3066