spacer spacer spacer spacer
Kaydon Bearings spacer spacer

Contact Us

 
spacer
spacer

Kaydon Reali-Slim® stainless steel bearings

SG series
Type A – angular contact

A deep groove bearing with reduced shoulder on one side of inner or outer race ball path. Snapover assembly permits use of a one-piece circular pocket ring separator and greater ball complement. These bearings will accept radial load and single direction thrust load and are normally used in conjunction with another bearing of similar construction. Type A bearings require the application of thrust to establish contact angle.

Click on the Kaydon part number to view and download 3D models and CAD files. You must login or register before accessing drawings.
 

 spacer

 
Log in to access Slewing Bearing 3D models & CAD files. Access Thin Section Bearings at SKF.com
 
Forgot password?  |  Register
Kaydon
part
number		 Dimensions in inches Capacities (lbs)1 Approx.
weight
(lbs)
Bore Outside
dia.		 Land
dia.
L1		 Land
dia.
L2		 C'Bore
dia.
L3		 Dynamic Static2
Kaydon
radial		 ISO
radial3		 Thrust Radial Thrust
SG040AR0 4.000 6.000 4.742 5.258 5.491 6,281 10,167 13,630 9,480 27,360 3.610
SG042AR0 4.250 6.250 4.992 5.508 5.741 6,438 10,384 14,090 9,950 28,730 3.830
SG045AR0 4.500 6.500 5.242 5.758 5.989 6,562 10,592 14,530 10,430 30,100 3.950
SG047AR0 4.750 6.750 5.492 6.008 6.239 6,745 10,792 14,970 10,900 31,460 4.170
SG050AR0 5.000 7.000 5.742 6.258 6.489 6,897 10,985 15,400 11,370 32,830 4.420
SG055AR0 5.500 7.500 6.242 6.758 6.989 7,192 11,352 16,240 12,320 35,570 4.730
SG060AR0 6.000 8.000 6.742 7.258 7.489 7,480 11,697 17,060 13,270 38,300 5.070
SG065AR0 6.500 8.500 7.242 7.758 7.987 7,761 12,023 17,870 14,220 41,040 5.410
SG070AR0 7.000 9.000 7.742 8.258 8.487 8,035 12,333 18,650 15,160 43,780 5.870
SG075AR0 7.500 9.500 8.242 8.758 8.987 8,303 12,629 19,420 16,110 46,510 6.200
SG080AR0 8.000 10.000 8.742 9.258 9.485 8,566 12,912 20,180 17,060 49,250 6.540
SG090AR0 9.000 11.000 9.742 10.258 10.485 9,073 13,446 21,640 18,960 54,720 7.220
SG100AR0 10.000 12.000 10.742 11.258 11.483 9,561 13,942 23,060 20,850 60,190 8.000
SG110AR0 11.000 13.000 11.742 12.258 12.481 10,027 14,409 24,440 22,750 65,660 8.680
SG120AR0 12.000 14.000 12.742 13.258 13.481 10,481 14,849 25,780 24,640 71,140 9.470
SG140AR0 14.000 16.000 14.742 15.258 15.478 11,338 15,665 28,360 28,430 82,080 10.900
SG160AR0 16.000 18.000 16.742 17.258 17.474 12,142 16,411 30,830 32,220 93,020 12.400
SG180AR0 18.000 20.000 18.742 19.258 19.472 12,898 17,101 33,200 36,020 104,000 13.800
SG200AR0 20.000 22.000 20.742 21.258 21.468 13,612 17,745 35,490 39,810 114,900 15.200
SG220AR0 22.000 24.000 22.742 23.258 23.468 14,290 18,351 37,712 43,598 125,856 16.630
SG250AR0 25.000 27.000 25.742 26.258 26.461 15,239 19,198 40,920 49,280 142,300 18.800
spacer spacer
Notes
1 Capacities listed are not simultaneous. For combined loading see discussion of Bearing Selection and Load Analysis in the Kaydon Reali-Slim® bearing catalog. Dynamic capacities are based upon 1 million revolutions of L10 life. Published capacities do not apply to hybrid series bearings P, X, and Y. Contact Kaydon product engineering for values.
2 Static capacities are non-brinell limits based on rigid support from the shaft and housing.
3 ISO Radial ratings are calculated per ISO 281:1990. They are included for comparison only.
4 "F" is the maximum shaft or housing fillet radius the bearing corners will clear.

 
Related pages
SG series, type C
SG series, type X
Thin section bearing selector
Reali-Slim® stainless steel bearings part number codes
Reali-Design® engineering software

Related downloads
Kaydon Reali-Slim® bearing catalog (Adobe PDF)

Adobe Acrobat Reader

 spacer spacer

Circular pocket separator
1/2" balls

SG series, type A - angular contact, bearing profile

4F = 0.080
Bearing corners are
normally chamfered