spacer spacer spacer spacer
Kaydon Bearings spacer spacer

Contact Us

 
spacer
spacer

Kaydon Reali-Slim® stainless steel bearings

SC series
Type C – radial contact

A Conrad assembled bearing designed primarily for application of radial load—deep ball grooves also permit application of some thrust load in either direction—often used in conjunction with another bearing.

Click on the Kaydon part number to view and download 3D models and CAD files. You must login or register before accessing drawings.
 

 spacer

 
Log in to access Slewing Bearing 3D models & CAD files. Access Thin Section Bearings at SKF.com
 
Forgot password?  |  Register
Kaydon
part
number		 Dimensions in Inches Capacities (lbs)1 Approx.
weight
(lbs)
Bore Outside
dia.		 Land
dia.
L1		 Land
dia.
L2		 Dynamic Static2
Kaydon
radial		 ISO
radial3		 Radial
SC040CP0 4.000 4.750 4.277 4.473 1,073 2,321 2,100 0.450
SC042CP0 4.250 5.000 4.527 4.723 1,108 2,370 2,220 0.470
SC045CP0 4.500 5.250 4.777 4.973 1,143 2,418 2,340 0.480
SC047CP0 4.750 5.500 5.027 5.223 1,176 2,464 2,460 0.500
SC050CP0 5.000 5.750 5.277 5.473 1,209 2,509 2,590 0.580
SC055CP0 5.500 6.250 5.777 5.973 1,274 2,594 2,830 0.590
SC060CP0 6.000 6.750 6.277 6.473 1,337 2,674 3,070 0.630
SC065CP0 6.500 7.250 6.777 6.973 1,397 2,751 3,310 0.680
SC070CP0 7.000 7.750 7.277 7.473 1,457 2,823 3,550 0.730
SC075CP0 7.500 8.250 7.777 7.973 1,514 2,893 3,790 0.780
SC080CP0 8.000 8.750 8.277 8.473 1,570 2,960 4,030 0.840
SC090CP0 9.000 9.750 9.277 9.473 1,678 3,085 4,510 0.940
SC100CP0 10.000 10.750 10.277 10.473 1,781 3,203 4,990 1.060
SC110CP0 11.000 11.750 11.277 11.473 1,879 3,313 5,470 1.160
SC120CP0 12.000 12.750 12.277 12.473 1,974 3,417 5,950 1.250
SC140CP0 14.000 14.750 14.277 14.473 2,154 3,611 6,910 1.520
SC160CP0 16.000 16.750 16.277 16.473 2,321 3,787 7,880 1.730
SC180CP0 18.000 18.750 18.277 18.473 2,478 3,951 8,840 1.940
SC200CP0 20.000 20.750 20.277 20.473 2,626 4,104 9,800 2.160
SC250CP0 25.000 25.750 25.277 25.473 2,962 4,447 12,200 2.690
spacer spacer
Notes
1 Capacities listed are not simultaneous. For combined loading see discussion of Bearing Selection and Load Analysis in the Kaydon Reali-Slim® bearing catalog. Dynamic capacities are based upon 1 million revolutions of L10 life. Published capacities do not apply to hybrid series bearings P, X, and Y. Contact Kaydon product engineering for values.
2 Static capacities are non-brinell limits based on rigid support from the shaft and housing.
3 ISO Radial ratings are calculated per ISO 281:1990. They are included for comparison only.
4 "F" is the maximum shaft or housing fillet radius the bearing corners will clear.

 
Related pages
SC series, type A
SC series, type X
Thin section bearing selector
Reali-Slim® stainless steel bearings part number codes
Reali-Design® engineering software

Related downloads
Kaydon Reali-Slim® bearing catalog (Adobe PDF)

Adobe Acrobat Reader

 spacer spacer

Snap-over separator
3/16" balls

SC series, type C - radial contact, bearing profile

4F = 0.040
Bearing corners are
normally chamfered