spacerHomeSearchRFQSuppliersSite mapContactspacer
spacer spacer spacer spacer
Kaydon Bearings spacer spacer

800.514.3066

customer service

spacer
spacer
spacer
Kaydon bearing solutions

 
Login to access drawings
and engineering software
 
New user? Register

spacer Kaydon Bearings - RealiSlim open bearings
Kaydon Bearings - KG series
Kaydon Bearings - type X, four point contact bearings

A Conrad assembled bearing designed for applications involving multiple loads. Unique internal geometry permits application of radial load, thrust load in either direction, and moment load, individually or in any combination. A single four-point contact bearing may replace two bearings in many applications.

Click on the Kaydon part number to view and download 3D models and CAD files. You must login or register before accessing drawings.
 

spacer spacer
Kaydon
part
number
Dimensions in Inches Capacities1 Approx.
weight
(lbs)
Bore Outside
dia.
Land
dia.
L1
Land
dia.
L2
Dynamic Static2
Radial
(lbs)
Thrust
(lbs)
Moment
(in-lbs)
Radial
(lbs)
Thrust
(lbs)
Moment
(in-lbs)
KG040XP0 4.000 6.000 4.742 5.258 7,979 11,260 14,966 8,210 20,520 20,520 3.600
KG042XP0 4.250 6.250 4.992 5.508 7,917 11,260 15,592 8,210 20,520 21,550 3.800
KG045XP0 4.500 6.500 5.242 5.758 8,205 11,750 16,930 8,760 21,890 24,080 4.000
KG047XP0 4.750 6.750 5.492 6.008 8,487 12,230 18,306 9,300 23,260 26,740 4.100
KG050XP0 5.000 7.000 5.742 6.258 8,762 12,710 19,721 9,850 24,620 29,550 4.300
KG055XP0 5.500 7.500 6.242 6.758 8,979 13,180 21,896 10,400 25,990 33,790 4.700
KG060XP0 6.000 8.000 6.742 7.258 9,503 14,090 24,956 11,490 28,730 40,220 5.100
KG065XP0 6.500 8.500 7.242 7.758 9,713 14,530 27,327 12,040 30,100 45,140 5.400
KG070XP0 7.000 9.000 7.742 8.258 10,208 15,400 30,636 13,130 32,830 52,530 5.800
KG075XP0 7.500 9.500 8.242 8.758 10,410 15,820 33,196 13,680 34,200 58,140 6.100
KG080XP0 8.000 10.000 8.742 9.258 10,882 16,650 36,743 14,770 36,940 66,480 6.500
KG090XP0 9.000 11.000 9.742 10.258 11,526 17,870 43,240 16,420 41,040 82,080 7.200
KG100XP0 10.000 12.000 10.742 11.258 12,147 19,040 50,124 18,060 45,140 99,320 7.900
KG110XP0 11.000 13.000 11.742 12.258 12,739 20,180 57,347 19,700 49,250 118,200 8.600
KG120XP0 12.000 14.000 12.742 13.258 13,315 21,280 64,935 21,340 53,350 138,700 9.300
KG140XP0 14.000 16.000 14.742 15.258 14,404 23,410 81,056 24,620 61,560 184,700 10.800
KG160XP0 16.000 18.000 16.742 17.258 15,425 25,450 98,373 27,910 69,770 237,200 12.300
KG180XP0 18.000 20.000 18.742 19.258 16,386 27,410 116,793 31,190 77,980 296,300 13.700
KG200XP0 20.000 22.000 20.742 21.258 17,293 29,300 136,238 34,470 86,180 362,000 15.800
KG220XP0 22.000 24.000 22.742 23.258 18,152 31,130 156,625 37,760 94,390 434,200 17.300
KG250XP0 25.000 27.000 25.742 26.258 19,360 33,780 188,838 42,680 106,700 554,900 19.500
KG300XP0 30.000 32.000 30.742 31.258 21,200 37,980 246,541 50,890 127,200 788,800 23.300
KG350XP0 35.000 37.000 35.742 36.258 22,845 41,970 308,527 59,100 147,700 1,064,000 27.100
KG400XP0 40.000 42.000 40.742 41.258 24,332 45,770 374,256 67,310 168,300 1,380,000 30.800
spacer spacer
Notes
1 Capacities listed are not simultaneous. For combined loading see discussion of Bearing Selection and Load Analysis in "Catalog 300—Ball & Roller Bearings". Dynamic capacities are based upon 1 million revolutions of L10 life. Published capacities do not apply to hybrid series bearings P, X, and Y. Contact Kaydon product engineering for values.
2 Static capacities are non-brinell limits based on rigid support from the shaft and housing.
3 "F" is the maximum shaft or housing fillet radius the bearing corners will clear.

 
Related pages
KG series, type A
KG series, type C
Thin section bearing selector
Reali-Slim® open & sealed bearings part number codes
Reali-Design® engineering software

Related downloads
Catalog 300: open bearings (Adobe PDF)
Catalog 300: all pages (Adobe PDF)
Precision tolerances and recommended fits (Adobe PDF)

Adobe Acrobat Reader

spacer spacer

Snap-over separator
1/2" balls

KG series, type X - four point contact, bearing profile

3F = 0.080
Bearing corners are
normally chamfered

 
 

 
 

 

About
Overview
75 years
News
Trade shows
Kaydon
companies

Locations
Certifications
Jobs

Home
Site map
Search
Login
Register

Thin section
bearings

Overview
Bearing selector
Reali-Slim® bearings:
      Open bearings
      Sealed bearings
      Endurakote® bearings
      Stainless steel bearings
      MM® metric bearings
      TT® turntables
Ultra-Slim® bearings
Custom bearings

Slewing ring
bearings

Overview
Slewing bearing selector
Four-point contact:
      RK slewing bearings
      HS slewing bearings
      HT slewing bearings
      MT slewing bearings
      KH slewing bearings
      XT slewing bearings
Eight-point contact:
      DT slewing bearings
Cross roller:
      XR slewing bearings
Three-row roller:
      TR slewing bearings

Bearing
repair

Overview
Our process
Case studies
White papers
FAQs
Request for
quote

Markets
Aerospace
& defense

Commercial
aerospace

Heavy
equipment

Industrial
machinery

Medical
systems

Mining
Oil & gas
Renewable
energy

Semiconductor

Resources
Engineering
R & D
Thin section bearing selector
Slewing bearing selector
Engineering software
Videos
Lit downloads
Thin bearing
CAD models

White papers
FAQs

Distributors
North America
International

Contact
Contact us & literature request
Customer service
Request for quote:
      Standard products
      Bearing remanufacturing
Specification data sheets:
      Custom bearings
      Slewing ring bearings
Return material request
Terms of use
Privacy policy
Supplier info

Twitter LinkedIn YouTube RSS news feed

 
 
©2010–2017 Kaydon® Bearings, an SKF Group Company. All rights reserved.
Kaydon®, the Kaydon® logo, and all other trademarks, unless otherwise noted, are owned or licensed by Kaydon® Bearings.
Muskegon, Michigan USA  |   231.755.3741  |   800.514.3066

SKF