spacerHomeSearchRFQSuppliersSite mapContactspacer
spacer spacer spacer spacer
Kaydon Bearings spacer spacer

800.514.3066

customer service

spacer
spacer
spacer
Kaydon Bearings Thinfinite Solutions

 
Login to access drawings
and engineering software
 
New user? Register

spacer Kaydon Bearings - Reali-Slim MM metric bearings
Kaydon Bearings - 8 mm series (double sealed)
Kaydon Bearings - type C, radial contact bearings

A Conrad assembled bearing designed primarily for application of radial load—deep ball grooves also permit application of some thrust load in either direction—often used in conjunction with another bearing.

Click on the Kaydon part number to view and download 3D models and CAD files. You must login or register before accessing drawings.
 

spacer spacer
Kaydon
part
number
Dimensions in mm Capacities1 Limiting
speeds
(RPM)**
Torque
max.
no load
(N-m)4
Approx.
weight
(kg)
Bore Outside
dia.
Land
dia.
L1
Land
dia.
L2
Radial (kg)
Static2 Dynamic
* † J02508CP0 25 41 31.55 34.42 303 255 5580 0.02 0.06
* † J05008CP0 50 66 56.55 59.42 556 350 3180 0.04 0.08
* † J06008CP0 60 76 66.55 69.42 656 384 2710 0.05 0.09
* † J07008CP0 70 86 76.55 79.42 758 417 2360 0.07 0.10
* † J08008CP0 80 96 86.55 89.42 859 448 2090 0.09 0.11
* † J09008CP0 90 106 96.55 99.42 959 478 1880 0.12 0.13
* † J10008CP0 100 116 106.55 109.42 1061 507 1700 0.15 0.14
* † J11008CP0 110 126 116.55 119.42 1162 534 1560 0.18 0.15
* † J12008CP0 120 136 126.55 129.42 1262 561 1440 0.22 0.16
* † J13008CP0 130 146 136.55 139.42 1364 588 1330 0.26 0.17
* † J14008CP0 140 156 146.55 149.42 1465 613 1240 0.30 0.18
* † J15008CP0 150 166 156.55 159.42 1565 638 1160 0.35 0.20
* † J16008CP0 160 176 166.55 169.42 1666 662 1090 0.40 0.20
* † J17008CP0 170 186 176.55 179.42 1767 686 1030 0.46 0.20
spacer spacer
Notes
1 Capacities listed are not simultaneous. For combined loading see discussion of Bearing Selection and Load Analysis in "Catalog 300—Ball & Roller Bearings". Dynamic capacities are based upon 1 million revolutions of L10 life. Published capacities do not apply to hybrid series bearings P, X, and Y. Contact Kaydon product engineering for values.
2 Static capacities are non-brinell limits based on rigid support from the shaft and housing.
3 "F" is the maximum shaft or housing fillet radius the bearing corners will clear.
4 Torque figures shown are for single bearings with standard lubricant at room temperature and under 5 pounds thrust load.
** Values apply to bearings loaded up to 20% of their dynamic capacity.
* Contact Kaydon for lead time and minimum purchase requirement.
Contact Kaydon for a 3D model.
 
Sealed series bearings are supplied with general purpose grease, satisfactory for operating temperatures of -40°F to +250°F (-40°C to +121°C). Other lubricants are available on special order.

 
Related pages
8 mm series (double sealed), type X
Thin section bearing selector
Reali-Slim MM® metric bearings part number codes
Reali-Design® engineering software

Related downloads
Catalog 300: metric bearings (Adobe PDF)
Catalog 300: all pages (Adobe PDF)
Precision tolerances and recommended fits (Adobe PDF)

Adobe Acrobat Reader

spacer spacer

Snap-over separator
5/32" balls

8 mm series (double sealed), type C - radial contact, bearing profile

3F = 0.8
Bearing corners are
normally chamfered

 
 

 
 

 

About
Overview
75 years
News
Trade shows
Kaydon
companies

Locations
Certifications
Jobs

Home
Site map
Search
Login
Register

Thin section
bearings

Overview
Bearing selector
Reali-Slim® bearings:
      Open bearings
      Sealed bearings
      Endurakote® bearings
      Stainless steel bearings
      MM® metric bearings
      TT® turntables
Ultra-Slim® bearings
Custom bearings

Slewing ring
bearings

Overview
Slewing bearing selector
Four-point contact:
      RK slewing bearings
      HS slewing bearings
      HT slewing bearings
      MT slewing bearings
      KH slewing bearings
      XT slewing bearings
Eight-point contact:
      DT slewing bearings
Cross roller:
      XR slewing bearings
Three-row roller:
      TR slewing bearings

Bearing
repair

Overview
Our process
Case studies
White papers
FAQs
Request for
quote

Markets
Aerospace
& defense

Commercial
aerospace

Heavy
equipment

Industrial
machinery

Medical
systems

Mining
Oil & gas
Renewable
energy

Semiconductor

Resources
Engineering
R & D
Thin section bearing selector
Slewing bearing selector
Engineering software
Videos
Lit downloads
Thin bearing
CAD models

White papers
FAQs

Distributors
North America
International

Contact
Contact us & literature request
Customer service
Request for quote:
      Standard products
      Bearing remanufacturing
Specification data sheets:
      Custom bearings
      Slewing ring bearings
Return material request
Terms of use
Privacy policy
Supplier info

Twitter LinkedIn YouTube RSS news feed

 
 
©2010–2017 Kaydon® Bearings, an SKF Group Company. All rights reserved.
Kaydon®, the Kaydon® logo, and all other trademarks, unless otherwise noted, are owned or licensed by Kaydon® Bearings.
Muskegon, Michigan USA  |   231.755.3741  |   800.514.3066

SKF