spacerHomeSearchRFQSuppliersSite mapContactspacer
spacer spacer spacer spacer
Kaydon Bearings spacer spacer

800.514.3066

customer service

spacer
spacer
spacer
Kaydon bearing solutions

 
Login to access drawings
and engineering software
 
New user? Register

spacer Kaydon Bearings - RealiSlim sealed bearings
Kaydon Bearings - JU series (double sealed)
Kaydon Bearings - type X, four point contact bearings

A Conrad assembled bearing designed for applications involving multiple loads. Unique internal geometry permits application of radial load, thrust load in either direction, and moment load, individually or in any combination. A single four-point contact bearing may replace two bearings in many applications.

Click on the Kaydon part number to view and download 3D models and CAD files. You must login or register before accessing drawings.
 

spacer spacer
Kaydon
part
number
Dimensions in inches Capacities1 Limiting
speeds
(RPM)*
Torque
max.
no load
(in-lb)3
Approx.
weight
(lbs)
Bore Outside
dia.
Land
dia.
L1
Land
dia.
L2
Dynamic Static2
Radial
(lbs)
Thrust
(lbs)
Moment
(in-lbs)
Radial
(lbs)
Thrust
(lbs)
Moment
(in-lbs)
JU040XP0 4.000 4.750 4.150 4.543 1,417 2,210 2,326 2,100 5,260 4,600 620 2.9 0.55
JU042XP0 4.250 5.000 4.400 4.793 1,464 2,290 2,541 2,220 5,560 5,140 590 3.2 0.58
JU045XP0 4.500 5.250 4.650 5.043 1,510 2,380 2,762 2,340 5,860 5,710 550 3.5 0.61
JU047XP0 4.750 5.500 4.900 5.293 1,556 2,460 2,991 2,460 6,160 6,320 520 3.9 0.65
JU050XP0 5.000 5.750 5.150 5.543 1,600 2,540 3,226 2,590 6,460 6,950 500 4.3 0.68
JU055XP0 5.500 6.250 5.650 6.043 1,687 2,690 3,717 2,830 7,060 8,300 450 5.1 0.74
JU060XP0 6.000 6.750 6.150 6.543 1,770 2,840 4,234 3,070 7,660 9,770 410 6.1 0.81
JU065XP0 6.500 7.250 6.650 7.043 1,851 2,990 4,775 3,310 8,270 11,370 380 7.0 0.87
JU070XP0 7.000 7.750 7.150 7.543 1,931 3,130 5,341 3,550 8,870 13,080 350 8.1 0.93
JU075XP0 7.500 8.250 7.650 8.043 2,007 3,270 5,930 3,790 9,470 14,910 330 9.2 0.99
JU080XP0 8.000 8.750 8.150 8.543 2,082 3,410 6,542 4,030 10,070 16,870 310 10.4 1.06
JU085XP0 8.500 9.250 8.650 9.043 2,155 3,543 7,176 4,270 10,670 18,940 265 11.7 1.12
JU090XP0 9.000 9.750 9.150 9.543 2,226 3,670 7,830 4,510 11,270 21,130 220 13.0 1.18
JU100XP0 10.000 10.750 10.150 10.543 2,364 3,930 9,201 4,990 12,470 25,880 200 16.0 1.31
JU110XP0 11.000 11.750 11.150 11.543 2,496 4,180 10,651 5,470 13,680 31,110 180 19.2 1.43
JU120XP0 12.000 12.750 12.150 12.543 2,622 4,420 12,174 5,950 14,880 36,830 160 22.8 1.56
spacer spacer
Notes
1 Capacities listed are not simultaneous. For combined loading see discussion of Bearing Selection and Load Analysis in "Catalog 300—Ball & Roller Bearings". Dynamic capacities are based upon 1 million revolutions of L10 life. Published capacities do not apply to hybrid series bearings P, X, and Y. Contact Kaydon product engineering for values.
2 Static capacities are non-brinell limits based on rigid support from the shaft and housing.
3 Torque figures shown are for single bearings with standard lubricant at room temperature and under 5 pounds thrust load.
4 "F" is the maximum shaft or housing fillet radius the bearing corners will clear.
* Values apply to bearings loaded up to 20% of their dynamic capacity.
 
Sealed series bearings are supplied with general purpose grease, satisfactory for operating temperatures of -40°F to +250°F (-40°C to +121°C). Other lubricants are available on special order.

 
Related pages
JU series (double sealed), type C
Thin section bearing selector
Reali-Slim® open & sealed bearings part number codes
Reali-Design® engineering software

Related downloads
Catalog 300: sealed bearings (Adobe PDF)
Catalog 300: all pages (Adobe PDF)
Precision tolerances and recommended fits (Adobe PDF)

Adobe Acrobat Reader

spacer spacer

Snap-over separator
3/16" balls

JU series (double sealed), type X - four point contact, bearing profile

4F = 0.015
Bearing corners are
normally chamfered

 
 

 
 

 

About
Overview
75 years
News
Trade shows
Kaydon
companies

Locations
Certifications
Jobs

Home
Site map
Search
Login
Register

Thin section
bearings

Overview
Bearing selector
Reali-Slim® bearings:
      Open bearings
      Sealed bearings
      Endurakote® bearings
      Stainless steel bearings
      MM® metric bearings
      TT® turntables
Ultra-Slim® bearings
Custom bearings

Slewing ring
bearings

Overview
Slewing bearing selector
Four-point contact:
      RK slewing bearings
      HS slewing bearings
      HT slewing bearings
      MT slewing bearings
      KH slewing bearings
      XT slewing bearings
Eight-point contact:
      DT slewing bearings
Cross roller:
      XR slewing bearings
Three-row roller:
      TR slewing bearings

Bearing
repair

Overview
Our process
Case studies
White papers
FAQs
Request for
quote

Markets
Aerospace
& defense

Commercial
aerospace

Heavy
equipment

Industrial
machinery

Medical
systems

Mining
Oil & gas
Renewable
energy

Semiconductor

Resources
Engineering
R & D
Thin section bearing selector
Slewing bearing selector
Engineering software
Videos
Lit downloads
Thin bearing
CAD models

White papers
FAQs

Distributors
North America
International

Contact
Contact us & literature request
Customer service
Request for quote:
      Standard products
      Bearing remanufacturing
Specification data sheets:
      Custom bearings
      Slewing ring bearings
Return material request
Terms of use
Privacy policy
Supplier info

Twitter LinkedIn YouTube RSS news feed

 
 
©2010–2017 Kaydon® Bearings, an SKF Group Company. All rights reserved.
Kaydon®, the Kaydon® logo, and all other trademarks, unless otherwise noted, are owned or licensed by Kaydon® Bearings.
Muskegon, Michigan USA  |   231.755.3741  |   800.514.3066

SKF