Reali-Slim® sealed bearings, JG series (double sealed), type X

Contact Kaydon customer service 800.514.3066

A Conrad assembled bearing designed for applications involving multiple loads. Unique internal geometry permits application of radial load, thrust load in either direction, and moment load, individually or in any combination. A single four-point contact bearing may replace two bearings in many applications.

Click on the Kaydon part number to view and download 3D models and CAD files. You must login or register before accessing drawings.

Kaydon part number	Dimensions in inches				Capacities¹						Limiting speeds (RPM)^**	Torque max. no load (in-lb)⁴	Approx. weight (lbs)
	Bore	Outside dia.	Land dia. L₁	Land dia. L₂	Radial (lbs)		Thrust (lbs)		Moment (in-lbs)
	Bore	Outside dia.	Land dia. L₁	Land dia. L₂	Static²	Dyn.	Static²	Dyn.	Static²	Dyn.
* † JG070XP0	7.000	9.000	7.554	8.602	13,130	10,208	32,830	15,400	52,530	30,636	240	17.0	5.80
* † JG075XP0	7.500	9.500	8.054	9.102	13,680	10,410	34,200	15,820	58,140	33,196	225	19.0	6.10
* † JG080XP0	8.000	10.000	8.554	9.602	14,770	10,882	36,940	16,650	66,480	36,743	210	21.0	6.50
* † JG090XP0	9.000	11.000	9.554	10.602	16,420	11,526	41,040	17,870	82,080	43,240	190	26.0	7.20
* † JG100XP0	10.000	12.000	10.554	11.602	18,060	12,147	45,140	19,040	99,320	50,124	175	32.0	7.90
* † JG110XP0	11.000	13.000	11.554	12.602	19,700	12,739	49,250	20,180	118,200	57,347	160	38.0	8.60
*JG120XP0	12.000	14.000	12.554	13.602	21,340	13,315	53,350	21,280	138,700	64,935	140	44.0	9.30
*JG140XP0	14.000	16.000	14.554	15.602	24,620	14,404	61,560	34,410	184,700	81,056	125	59.0	10.80
*JG160XP0	16.000	18.000	16.554	17.602	27,910	15,425	69,770	25,450	237,200	98,373	110	76.0	12.30
*JG180XP0	18.000	20.000	18.554	19.602	31,190	16,386	77,980	27,410	296,300	116,793	100	95.0	13.70
*JG200XP0	20.000	22.000	20.554	21.602	34,470	17,293	86,180	29,300	362,000	136,238	90	115.0	15.80
*JG220XP0	22.000	24.000	22.554	23.602	37,750	18,152	94,390	31,130	434,200	156,625	80	138.0	16.80
*JG250XP0	25.000	27.000	25.554	26.602	42,680	19,360	106,700	33,780	554,900	188,838	75	177.0	19.50
*JG300XP0	30.000	32.000	30.554	31.602	50,890	21,200	127,200	37,980	788,800	246,541	60	252.0	23.30
*JG350XP0	35.000	37.000	35.554	36.602	59,100	22,845	147,700	41,970	1,064,000	308,527	55	339.0	27.10
*JG400XP0	40.000	42.000	40.554	41.602	63,310	24,332	168,300	45,770	1,380,000	374,256	50	440.0	30.80

Notes
1	Capacities listed are not simultaneous. For combined loading see discussion of Bearing Selection and Load Analysis in "Catalog 300—Ball & Roller Bearings". Dynamic capacities are based upon 1 million revolutions of L₁₀ life. Published capacities do not apply to hybrid series bearings P, X, and Y. Contact Kaydon product engineering for values.
2	Static capacities are non-brinell limits based on rigid support from the shaft and housing.
3	"F" is the maximum shaft or housing fillet radius the bearing corners will clear.
4	Torque figures shown are for single bearings with standard lubricant at room temperature and under 5 pounds thrust load.
**	Values apply to bearings loaded up to 20% of their dynamic capacity.
*	Contact Kaydon for lead time and minimum purchase requirement.
†	Contact Kaydon for SolidWorks model.
Sealed series bearings are supplied with general purpose grease, satisfactory for operating temperatures of -40°F to +250°F (-40°C to +121°C). Other lubricants are available on special order.

Related downloads
Catalog 300: sealed bearings, type X (Adobe PDF)
Catalog 300: all pages (Adobe PDF)
Precision tolerances and recommended fits (Adobe PDF)

Adobe Acrobat Reader

Snapover separator
1/2" balls

³F = 0.080
Bearing corners are
normally chamfered

About
History
News
Trade shows
Divisions
Locations
Certifications
Jobs

Home
Site map
Search
Login
Register

Thin section
bearings
Overview
Reali-Slim® bearings:
      Open bearings
      Sealed bearings
      MM™ metric bearings
      TT® turntables
Ultra-Slim® bearings
Custom bearings

Slewing ring
bearings
Overview
RK slewing ring bearings
MT slewing ring bearings
KH slewing ring bearings
HS slewing ring bearings

Bearing
repair
Overview
Our process
Case studies
White papers
FAQs
Request for
quote

Markets
Aerospace
& defense
Heavy
equipment
Industrial
machinery
Medical
systems
Renewable
energy
Semiconductor

Resources
Engineering
R & D
Engineering software
Downloads
White papers
FAQs

Distributors
US/Canada
International

Contact
Contact us & literature request
Customer service
Request for quote:
      Standard products
      Bearing remanufacturing
Specification data sheets:
      Custom bearings
      Slewing ring bearings
Return material request
Terms of use
Privacy policy
Supplier info

©2010–2012 Kaydon® Corporation Inc., Bearings Division. All rights reserved.
Kaydon®, the Kaydon® logo, and all other trademarks, unless otherwise noted, are owned or licensed by the Kaydon® Corporation and its subsidiaries.
Muskegon, Michigan USA  |   231.755.3741  |   800.514.3066